เอ 
DK conveyor chain features a construction, plus the names with the elements are stated in the drawing. These elements have functions specified below.
Pins
Pins help each of the load acting about the chain together with plates, and once the chain is engaged with all the sprockets, they slide along with bushings as bearings. They are really topic to dress in and especially should have substantial shear power, bending strength and dress in resistance. Hardened and tempered tough steel, carburized steel, or induction-hardened steel is applied.
Rollers
Rollers shield the chain from shocks with all the sprockets, and when the chain is engaged with all the sprockets, the rollers bend the chain smoothly and act to reduce the resistance once the chain runs on a rail. These are required to get high shock fatigue strength, collapse strength and wear resistance. Hardened and tempered hard steel, carburized steel or induction-hardened steel is made use of.
Bushings
Bushings are located between pins and rollers and act as bearings for both the pins and rollers to not transmit the load obtained by the rollers directly to your pins once the chain is engaged using the sprockets. They may be needed to get substantial shock fatigue power, collapse power and dress in resistance, and normally, carburized steel is applied.
Plates
Plates are topic to repeated tension with the chain and often to significant shocks. These are expected to get high tensile power, and especially higher shock power and fatigue power. High tensile steel is made use of for typical chains and heat-treated alloy steel for heavy-duty chains.
T-pins
T-pins reduce the outer plates from disengaging from the pins. They are really manufactured from soft steel considering that pins are normally pressed-in the outer plates and thus no big force acts about the T-pins.
