China Flange Mounting Foot Mounting High Torque Helical Geared Motor Reduction Gearbox with Good quality

utworzone przez | Jan 16, 2023 | skrzynia biegów

Item Description

 

Model Details

one) Created of substantial top quality materials,  non-rustingBoth flange and foot mounting available and suited for all-spherical set up
two) Large output torque and higher radiating performance
three)Exact grinding helical equipment with Smooth working and low sounds, no deformation,can function extended time in dreadful issue
four)Wonderful look, durable services life and small volume, compact framework
five)Each 2 and 3 stage offered with wide ratio assortment from 5 to two hundred
six)Various output shaft diameter accessible -forty-50mm
seven)Modular construction enlarge ratio from 5 to 1400

Primary Materials:
1)housing with aluminium alloyand forged iron content
two)Output Shaft Substance:20CrMnTi
three)Great good quality no sounds bearings to hold lengthy support life
four)High overall performance oil seal to avert from oil leakage

Purposes:
G3 Series helical gear motor are broad employed for all types of automatic equipment, this sort of as chip elimination device, conveyor, packaging gear, woodworking equipment, farming equipment, slurry scraper ,dryer, mixer and so on.
 

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 twenty five thirty forty fifty 60 80 one hundred 100 one hundred twenty a hundred and sixty   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 forty six 35 28 23 18 fourteen – eleven 9 7
M2(Nm) 50hz 3.two 6.five nine.eight 12.nine 16.one 19.six 25.seven 31.one 37.5 forty nine.five 62.9 – 76.1 100.7 a hundred twenty five.four
60hz three 5 8 eleven thirteen 17 21 26 31 41 fifty two – 63 84 one hundred and five
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 ten fifteen 20 25 thirty 40 fifty 60 80 one hundred 100 120 a hundred and sixty two hundred
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 fifty six 45 35 29 23 eighteen fourteen 13 twelve 8 seven
M2(Nm) 50hz six.five 12.6 19.1 26.3 32.6 38.nine fifty.four sixty three seventy five.six a hundred.eight 103.nine one hundred twenty five.four 150 two hundred.four 250.seven
60hz 5.four 10.5 sixteen.six 21.nine 27.one 32.4 forty two fifty two.5 sixty three eighty four 86.6 104.five a hundred twenty five 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 ten fifteen 20 twenty five 30 40 fifty sixty eighty a hundred one hundred one hundred twenty 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 forty seven 36 29 24 eighteen fourteen 14 twelve 9 seven
M2(Nm) 50hz 12.9 25 38.six 51.4 65.4 seventy eight.2 one hundred.seven a hundred twenty five.four one hundred fifty two hundred.four 206.8 250.7 301.1 400.seven 461.eight
60hz 10.seven twenty.eight 32.1 42.9 fifty four.five 65.2 eighty three.nine 104.5 one hundred twenty five 167 172.3 208.nine 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio five ten 15 twenty twenty five 30 40 fifty sixty 80 a hundred one hundred one hundred twenty a hundred and sixty two hundred
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 a hundred and forty ninety four sixty nine fifty eight forty six 35 29 24 eighteen fourteen 14 11 nine seven
M2(Nm) 50hz 24.6 forty eight.two 72.nine 97.five 122.1 a hundred forty five.seven 187.five 235.seven 282.9 376.1 387.9 439 527 703 764
60hz 20.5 forty.two sixty.seven 81.3 201.eight 121.4 156.3 196.4 235.7 313.4 323.two 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4571 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 ten 15 twenty twenty five 30 forty fifty sixty 80 100 a hundred a hundred and twenty a hundred and sixty 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 a hundred and forty ninety three 70 fifty five 47 34 27 24 17 fourteen 13 12 eight 7
M2(Nm) 50hz 48.two 97.five a hundred forty five.7 193.nine 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz forty.2 eighty one.three 121.4 161.six 201.eight 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 thirty 40 50 60 eighty a hundred        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 sixty eight fifty four forty five 36 28 24 eighteen fourteen        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1571 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4571 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

 

G3FM: Three Section Gear MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
normal brake
0.1kw  Ø18 5–30-40-50 236 270 192.five 11 sixteen.five a hundred and seventy 4 10 thirty one hundred forty five 35 18 twenty.5 129 6 157 eighty eighty one
 Ø22 -a hundred and sixty-200 262 296 197.5 11 19 185 four 12 forty 148 47 22 24.five 129 6 171.5 89.5 eighty three.5
0.2kw  Ø18 5- 267 270 192.five 11 sixteen.5 a hundred and seventy 4 ten thirty one hundred forty five 35 18 twenty.5 129 6 161 80 81
 Ø22 -80-a hundred 293 296 197.five eleven 19 185 four 12 40 148 47 22 24.five 129 6 171.five 89.five eighty three.five
 Ø28 306 309.five 208.five 11 23.five 215 4 fifteen 45 a hundred and seventy fifty 28 31 129 8 198.five 105.five 88
0.4kw  Ø22 five- 314 324.5 204 11 19 185 four twelve 40 148 forty seven 22 24.five 139 6 171.five 89.5 88.5
 Ø28 -80-one hundred 330 337.5 215 11 23.5 215 4 15 45 a hundred and seventy 50 28 31 139 eight 198.five one hundred and five.five 93
 Ø32 349 357 229.five thirteen 28.five 250 four fifteen 55 180 60 32 35 139 ten 234 126 ninety eight
0.75kw  Ø28 five- 350.five 343.five 227.five eleven 23.five 215 4 fifteen forty five a hundred and seventy 50 28 31 159 eight 198.5 one hundred and five.five 103
 Ø32 -eighty-a hundred 379.five 387 242 13 28.5 250 four 15 fifty five a hundred and eighty 60 32 35 159 10 234 126 108
 Ø40 401.five 408.five 270 eighteen 34 310 five eighteen sixty five 230 71 forty forty three 185 12 284 149 126.five
1.5kw  Ø32 5- 420.five 441 254 thirteen 28.5 250 five 15 55 a hundred and eighty sixty 32 35 185 ten 234 126 121
 Ø40 -80-a hundred 457.five 478 270 18 34 310 5 eighteen sixty five 230 71 forty forty three 185 12 284 149 126.5
 Ø50 485.five 506 300 22 forty 360 5 twenty five 75 270 eighty three fifty fifty three.5 185 14 325 173.five 132.five
2.2kw  Ø40 5- 466.five 487 270 eighteen 34 310 5 eighteen sixty five 230 71 forty 43 185 twelve 284 149 126.five
 Ø50 -80-100 510.five 531 300 22 forty 360 5 twenty five seventy five 270 eighty three 50 fifty three.5 185 14 325 173.5 132.five

 

G3LM: 3 Phase Equipment MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 five–thirty-40-fifty 236 270 forty a hundred and ten a hundred thirty five 16.5 sixty five 9 45 30 18 20.five 129 183 six 133 85 10
 Ø22 -one hundred sixty-200 262 296 65 a hundred thirty 155 19 90 11 55 forty 22 24.5 129 193 6 139.five 90 twelve
0.2kw  Ø18 5- 267 270 40 one hundred ten 135 sixteen.five 65 9 forty five thirty eighteen 20.five 129 183 six 133 85 ten
 Ø22 -80-a hundred 293 296 sixty five 130 one hundred fifty five 19 90 eleven 55 forty 22 24.5 129 193 6 139.5 ninety twelve
 Ø28 306 309.5 ninety 140 175 23.5 125 eleven sixty five 45 28 31 129 203 8 170 110 fifteen
0.4kw  Ø22 five- 314 324.five 65 one hundred thirty one hundred fifty five 19 ninety 11 55 40 22 24.5 139 199.5 six 141.5 ninety 12
 Ø28 -eighty-100 330 337.five 90 a hundred and forty a hundred seventy five 23.5 a hundred twenty five 11 sixty five 45 28 31 139 210 8 a hundred and seventy one hundred ten fifteen
 Ø32 349 357 130 170 208 28.5 a hundred and seventy thirteen 70 fifty five 32 35 139 226 ten 198 one hundred thirty 18
0.75kw  Ø28 five- 350.five 343.five 90 140 one hundred seventy five 23.5 one hundred twenty five 11 65 forty five 28 31 159 222 eight 170 110 fifteen
 Ø32 -80-a hundred 379.five 387 a hundred thirty 170 208 28.five 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 401.five 408.5 one hundred fifty 210 254 34 196 fifteen ninety sixty five forty forty three 185 249 twelve 230 a hundred and fifty twenty
1.5kw  Ø32 5- 420.5 441 130 170 208 28.5 a hundred and seventy thirteen 70 55 32 35 185 250.5 10 198 one hundred thirty eighteen
 Ø40 -eighty-a hundred 457.five 478 one hundred fifty 210 254 34 196 15 90 65 forty forty three 185 260 12 230 a hundred and fifty 20
 Ø50 485.five 506 one hundred sixty 230 290 40 210 18 one hundred seventy five 50 53.5 185 288 fourteen 265 one hundred seventy 25
2.2kw  Ø40 five- 466.5 487 a hundred and fifty 210 254 34 196 15 90 sixty five 40 43 185 260 12 230 one hundred fifty 20
 Ø50 -eighty-100 510.5 531 one hundred sixty 230 290 40 210 18 one hundred seventy five fifty 53.five 185 288 14 265 one hundred seventy 25

Outline and mounting dimension:

 

Uszczelka

  HangZhou CZPT Mechanical & Electrical Co., Ltd is located in HangZhou, ZHangZhoug, the cradle of the non-public financial system. Our business With an modern leadership crew, modern management method, high-quality workforce, comprehensive production facilities, full inspection gear, strong complex drive, trustworthy product top quality, fantastic gives range of items which can satisfy your multifarious needs. We adhere to the administration rules of “quality initial, buyer first and credit score-dependent” considering that the establishment of the business and constantly do our ideal to fulfill potential demands of our buyers. Our organization is sincerely ready to cooperate with enterprises from all in excess of the world in buy to realize a CZPT circumstance considering that the development of economic globalization has developed with an irresistible pressure.

one.Q:Can you make as per consumer drawing?
   A: Yes, we supply personalized service for consumers accordingly. We can use customer’s nameplate for gearboxes.

two.Q:What is your conditions of payment ?
   A: thirty% deposit before production,harmony T/T ahead of shipping and delivery.

3.Q:Are you a trading business or manufacturer?
   A:We are a manufacurer with advanced equipment and experienced personnel.

4.Q:What’s your production potential?
   A:4000-5000 PCS/Thirty day period.

5.Q:Totally free sample is offered or not?
   A:Of course, we can source free sample if consumer concur to pay for the courier price.

6.Q:Do you have any certification?
    A:Indeed, we have CE certificate and SGS certificate report.

 

US $2,000
/ Piece
| 		5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal Type
Layout: Coaxial
Gear Shape: Horizontal Type
Step: Two Stage-Three Stage

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 46 35 28 23 18 14 – 11 9 7
M2(Nm) 50hz 3.2 6.5 9.8 12.9 16.1 19.6 25.7 31.1 37.5 49.5 62.9 – 76.1 100.7 125.4
60hz 3 5 8 11 13 17 21 26 31 41 52 – 63 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
M2(Nm) 50hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 47 36 29 24 18 14 14 12 9 7
M2(Nm) 50hz 12.9 25 38.6 51.4 65.4 78.2 100.7 125.4 150 200.4 206.8 250.7 301.1 400.7 461.8
60hz 10.7 20.8 32.1 42.9 54.5 65.2 83.9 104.5 125 167 172.3 208.9 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 140 94 69 58 46 35 29 24 18 14 14 11 9 7
M2(Nm) 50hz 24.6 48.2 72.9 97.5 122.1 145.7 187.5 235.7 282.9 376.1 387.9 439 527 703 764
60hz 20.5 40.2 60.7 81.3 201.8 121.4 156.3 196.4 235.7 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4020 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 93 70 55 47 34 27 24 17 14 13 12 8 7
M2(Nm) 50hz 48.2 97.5 145.7 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.2 81.3 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 30 40 50 60 80 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 68 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1029 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4020 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

###

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 157 80 81
 Ø22 60-80-100-120-160-200 262 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
0.2kw  Ø18 5-10-15-20-25 267 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 161 80 81
 Ø22 30-40-50-60-80-100 293 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
 Ø28 100-120-160-200 306 309.5 208.5 11 23.5 215 4 15 45 170 50 28 31 129 8 198.5 105.5 88
0.4kw  Ø22 5-10-15-20-25 314 324.5 204 11 19 185 4 12 40 148 47 22 24.5 139 6 171.5 89.5 88.5
 Ø28 30-40-50-60-80-100 330 337.5 215 11 23.5 215 4 15 45 170 50 28 31 139 8 198.5 105.5 93
 Ø32 100-120-160-200 349 357 229.5 13 28.5 250 4 15 55 180 60 32 35 139 10 234 126 98
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 227.5 11 23.5 215 4 15 45 170 50 28 31 159 8 198.5 105.5 103
 Ø32 30-40-50-60-80-100 379.5 387 242 13 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 100-120-160-200 401.5 408.5 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5-10-15-20-25 420.5 441 254 13 28.5 250 5 15 55 180 60 32 35 185 10 234 126 121
 Ø40 30-40-50-60-80-100 457.5 478 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 100-120-160-200 485.5 506 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 5-10-15-20-25 466.5 487 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 30-40-50-60-80-100 510.5 531 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5

###

G3LM: THREE PHASE GEAR MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 60-80-100-120-160-200 262 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
0.2kw  Ø18 5-10-15-20-25 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 30-40-50-60-80-100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
 Ø28 100-120-160-200 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15
0.4kw  Ø22 5-10-15-20-25 314 324.5 65 130 155 19 90 11 55 40 22 24.5 139 199.5 6 141.5 90 12
 Ø28 30-40-50-60-80-100 330 337.5 90 140 175 23.5 125 11 65 45 28 31 139 210 8 170 110 15
 Ø32 100-120-160-200 349 357 130 170 208 28.5 170 13 70 55 32 35 139 226 10 198 130 18
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 90 140 175 23.5 125 11 65 45 28 31 159 222 8 170 110 15
 Ø32 30-40-50-60-80-100 379.5 387 130 170 208 28.5 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 100-120-160-200 401.5 408.5 150 210 254 34 196 15 90 65 40 43 185 249 12 230 150 20
1.5kw  Ø32 5-10-15-20-25 420.5 441 130 170 208 28.5 170 13 70 55 32 35 185 250.5 10 198 130 18
 Ø40 30-40-50-60-80-100 457.5 478 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 100-120-160-200 485.5 506 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
2.2kw  Ø40 5-10-15-20-25 466.5 487 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 30-40-50-60-80-100 510.5 531 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
US $2,000
/ Piece
| 		5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal Type
Layout: Coaxial
Gear Shape: Horizontal Type
Step: Two Stage-Three Stage

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 46 35 28 23 18 14 – 11 9 7
M2(Nm) 50hz 3.2 6.5 9.8 12.9 16.1 19.6 25.7 31.1 37.5 49.5 62.9 – 76.1 100.7 125.4
60hz 3 5 8 11 13 17 21 26 31 41 52 – 63 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
M2(Nm) 50hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 47 36 29 24 18 14 14 12 9 7
M2(Nm) 50hz 12.9 25 38.6 51.4 65.4 78.2 100.7 125.4 150 200.4 206.8 250.7 301.1 400.7 461.8
60hz 10.7 20.8 32.1 42.9 54.5 65.2 83.9 104.5 125 167 172.3 208.9 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 140 94 69 58 46 35 29 24 18 14 14 11 9 7
M2(Nm) 50hz 24.6 48.2 72.9 97.5 122.1 145.7 187.5 235.7 282.9 376.1 387.9 439 527 703 764
60hz 20.5 40.2 60.7 81.3 201.8 121.4 156.3 196.4 235.7 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4020 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 93 70 55 47 34 27 24 17 14 13 12 8 7
M2(Nm) 50hz 48.2 97.5 145.7 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.2 81.3 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 30 40 50 60 80 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 68 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1029 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4020 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

###

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 157 80 81
 Ø22 60-80-100-120-160-200 262 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
0.2kw  Ø18 5-10-15-20-25 267 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 161 80 81
 Ø22 30-40-50-60-80-100 293 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
 Ø28 100-120-160-200 306 309.5 208.5 11 23.5 215 4 15 45 170 50 28 31 129 8 198.5 105.5 88
0.4kw  Ø22 5-10-15-20-25 314 324.5 204 11 19 185 4 12 40 148 47 22 24.5 139 6 171.5 89.5 88.5
 Ø28 30-40-50-60-80-100 330 337.5 215 11 23.5 215 4 15 45 170 50 28 31 139 8 198.5 105.5 93
 Ø32 100-120-160-200 349 357 229.5 13 28.5 250 4 15 55 180 60 32 35 139 10 234 126 98
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 227.5 11 23.5 215 4 15 45 170 50 28 31 159 8 198.5 105.5 103
 Ø32 30-40-50-60-80-100 379.5 387 242 13 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 100-120-160-200 401.5 408.5 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5-10-15-20-25 420.5 441 254 13 28.5 250 5 15 55 180 60 32 35 185 10 234 126 121
 Ø40 30-40-50-60-80-100 457.5 478 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 100-120-160-200 485.5 506 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 5-10-15-20-25 466.5 487 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 30-40-50-60-80-100 510.5 531 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5

###

G3LM: THREE PHASE GEAR MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 60-80-100-120-160-200 262 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
0.2kw  Ø18 5-10-15-20-25 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 30-40-50-60-80-100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
 Ø28 100-120-160-200 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15
0.4kw  Ø22 5-10-15-20-25 314 324.5 65 130 155 19 90 11 55 40 22 24.5 139 199.5 6 141.5 90 12
 Ø28 30-40-50-60-80-100 330 337.5 90 140 175 23.5 125 11 65 45 28 31 139 210 8 170 110 15
 Ø32 100-120-160-200 349 357 130 170 208 28.5 170 13 70 55 32 35 139 226 10 198 130 18
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 90 140 175 23.5 125 11 65 45 28 31 159 222 8 170 110 15
 Ø32 30-40-50-60-80-100 379.5 387 130 170 208 28.5 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 100-120-160-200 401.5 408.5 150 210 254 34 196 15 90 65 40 43 185 249 12 230 150 20
1.5kw  Ø32 5-10-15-20-25 420.5 441 130 170 208 28.5 170 13 70 55 32 35 185 250.5 10 198 130 18
 Ø40 30-40-50-60-80-100 457.5 478 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 100-120-160-200 485.5 506 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
2.2kw  Ø40 5-10-15-20-25 466.5 487 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 30-40-50-60-80-100 510.5 531 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25

Agricultural Gearboxes

There are several types of agricultural gearboxes, and they are used in various applications. Among them are Bevel gearboxes, CZPT speed gearboxes, and Worm gear speed reducers. If you’re looking for a reliable, high-performing agricultural gearbox, you’ve come to the right place. Read on to learn more about these gearboxes. Also, check out our guide to bevel gearboxes.
agriculturalparts

Bevel gearboxes

The fatigue life of bevel gearboxes in agricultural equipment is determined by the cumulative damage sums for different operations. A simulation model was used to assess the fatigue life of a spiral bevel gear. The accumulated damage sums for each operation were shown in figure 9a. The subsoiler tillage operation exceeded the damage sum of one. This criterion indicates that the fatigue life of a gearbox is shorter than its service life.
In bevel gearboxes, the second shaft has two shafts that are connected to each other. One shaft is mounted to the outer surface of the housing 3 through bearings, while the other shaft has a flange that protrudes into the gear housing. The second shaft is attached via bearings on the gear housing and flange. It is mounted in this way to allow the bevel gear to rotate smoothly.
agriculturalparts

CZPT speed gearboxes

If you are an agricultural machine owner, you know that the right speed agricultural gearboxes can make the difference between a profitable crop harvest or a disaster. Today’s agricultural machinery can be found in a variety of applications, including for crop and animal production. Many of these applications require heavy-duty gearboxes with large capacity. The quality of these agricultural gearboxes depends on the quality of their bearings, which are important to the longevity of your equipment.
Industrial CZPT gearboxes can be repaired and overhauled by qualified and experienced technicians at CZPT Products. CZPT gearboxes can be repaired or rebuilt at significant savings. For industrial uses, the RAR model is perfect for applications where space is a consideration. Industrial CZPT gearboxes are available in multiple sizes and types, and they can be customized to meet your unique needs. For the best price and service, contact CZPT Products today!
agriculturalparts

CZPT speed bevel gearboxes

The demand for food has skyrocketed since the 2010 global financial crisis, and while the world’s population is still rising, at a slower rate, land is not. This is forcing agricultural machinery manufacturers to come up with innovative solutions to maximize the use of available land. The need for agricultural machinery is also growing due to shorter cropping cycles and wear and tear on equipment. CZPT gearbox manufacturers are meeting this demand with high-quality products.
A number of benefits make CZPT speed bevel gearboxes the preferred choice for agricultural applications. In addition to its renowned performance, the product’s design has been adapted for use in agricultural and glass machinery. The result is a unit with low backlash and high transmission. Moreover, the CZPT model is the best all-rounder among servo right-angle gearboxes.
China Flange Mounting Foot Mounting High Torque Helical Geared Motor Reduction Gearbox with Good quality China Flange Mounting Foot Mounting High Torque Helical Geared Motor Reduction Gearbox with Good quality
editor by czh 2023-01-16