Kotak Gear PTO untuk Penuai Tomato

🔌 PTO Gearbox for Tomato Harvester — Overview

Introducing our high-efficiency PTO gearbox for Tomato Harvester applications — a rugged, field-proven kotak gear pertanian that transforms standard PTO output into the ideal rotational speed and torque for mechanical tomato picking, processing tomato harvest, vine crop collection. Crafted from premium materials and assembled under strict ISO 9001 quality management, this farm equipment gear drive delivers exceptional reliability in Australia’s most demanding agricultural environments.

Our tomato harvester PTO gearbox features hardened and ground gear sets with optimised tooth profiles for whisper-quiet operation and maximum power efficiency. The heavy-duty cast iron housing provides excellent vibration damping and heat dissipation, while multi-stage sealing keeps contaminants out and lubricant in. This implement gearbox is the trusted choice of professional farmers, contractors, and equipment dealers seeking uncompromising quality.

📊 Technical Specifications — Tomato Harvester PTO Gearbox

Below is a comprehensive specification table for our tomato harvester agricultural gearbox. All parameters are customisable to your specific requirements.

Parameter	Standard Value	Custom Range
Input Speed (RPM)	1000	540 / 1000 RPM configurable
Output Speed (RPM)	1400	Custom ratio available
Gear Ratio	1.93:1	Wide range of ratios on request
Rated Input Power	40-120 HP	Custom power ratings available
Maximum Torque (Nm)	550-1400	Higher ratings on request
Gear Type	Hypoid Gear	Multiple gear configurations
Gear Hardness (HRC)	58-62	Case-hardened per AGMA standards
Housing Material	Cast Steel	Custom alloys available
Shaft Diameter — Input (mm)	35	1-3/8″ or 1-3/4″ standard splines
Shaft Diameter — Output (mm)	60	Metric or imperial options
Spline Configuration — Input	21-spline 1-3/8″	All standard PTO profiles
Bearing Type	Tapered Roller Bearing	Premium SKF / NTN / Timken
Seal Type	PTFE Seal	Upgrade options available
Lubrication Type	SAE 85W-140 GL-5	Synthetic-compatible
Oil Capacity (L)	2.7	Varies by model size
Weight (kg)	32-60	Depending on ratio & size
Surface Treatment	Hot-Dip Galvanizing	Marine-grade optional
Mounting Style	Shaft Mount	Custom brackets available
Operating Temp Range (°C)	-25 to +50	Extended range on request
Service Life (hours)	10000+	With proper maintenance

🏆 Performance Advantages — Why Our Tomato Harvester PTO Gearbox Outperforms the Competition

When comparing our kotak gear pertanian to budget alternatives, the differences are significant and measurable. Here is how our tomato harvester PTO gearbox delivers superior value:

⚖ Military-Grade Gear Steel

Our gears utilise 20CrMnTi alloy steel with case-hardening to ensure a surface hardness of HRC 58-62 while maintaining a tough, ductile core — far superior to the mild steel gears found in inferior products.

🛡 IP65 Dust Protection

The fully sealed gearbox housing achieves IP65-rated protection against dust and water jets, ideal for Australia’s harsh outback conditions. Budget alternatives often lack proper sealing and fail in dusty environments.

⚡ High-Efficiency Gear Mesh

Computer-optimised gear tooth profiles achieve power transmission efficiency above 96%, reducing fuel consumption and heat generation compared to poorly designed alternatives that waste 10-15% of input power as heat.

💰 Total Cost of Ownership

While our upfront cost is 15-25% higher than budget options, the extended service life (10,000+ hours vs 3,000 hours typical) and lower maintenance requirements deliver 40-60% savings over the equipment lifecycle.

🌏 Corrosion Resistance

Multi-layer surface treatment including zinc phosphate primer and epoxy topcoat provides excellent corrosion resistance in humid coastal environments, salt spray exposure, and chemical contact from fertilizers.

🔧 Modular Design

Our modular gearbox platform allows field-swappable gear sets for different ratio configurations, reducing inventory costs for dealers and enabling quick adaptation to different implements.

⚙ How the PTO Gearbox Works in a Tomato Harvester

The PTO gearbox for Tomato Harvester functions as the power conversion hub within the implement’s drivetrain. Positioned at the central drivetrain housing of the machine, it accepts rotational input from the tractor’s PTO shaft — standardised at either 540 or 1000 RPM — and translates this into the precise speed and torque combination needed for effective mechanical tomato picking, processing tomato harvest, vine crop collection.

Within the gearbox housing, the input shaft meshes with a carefully designed gear train. For tomato harvester applications, this typically involves a multi-stage reduction using hardened steel gears arranged in helical or bevel configurations. The helical arrangement provides smoother engagement and lower noise levels, while bevel gears enable the necessary change in rotational axis orientation. Each gear stage multiplies torque while proportionally reducing speed, delivering the exact power profile the implement requires.

The tomato harvester gearbox plays several vital roles: it adapts the tractor’s PTO speed to the implement’s operational requirements, it changes the axis of rotation where needed (e.g., from horizontal to vertical or vice versa), and it serves as a structural mount point for the implement’s drive components. Our design ensures that under the dynamic loads characteristic of mechanical tomato picking, processing tomato harvest, vine crop collection — including variable resistance, shock impacts, and continuous duty cycles — the gearbox delivers consistent, reliable performance with minimal power loss and vibration.

🔄 Brand Compatibility, Replacement & Spare Parts

Our tomato harvester PTO gearbox is engineered as a high-quality replacement for gearboxes used in equipment manufactured by the following brands:

Compatible Brand	Replacement Capability	Parts Availability
Grimme*	Direct bolt-on replacement	Full range of gears, seals, bearings & shafts
AVR*	Direct bolt-on replacement	Full range of gears, seals, bearings & shafts
Dewulf*	Direct bolt-on replacement	Full range of gears, seals, bearings & shafts
Ploeger*	Direct bolt-on replacement	Full range of gears, seals, bearings & shafts
Simon*	Direct bolt-on replacement	Full range of gears, seals, bearings & shafts
Standen*	Direct bolt-on replacement	Full range of gears, seals, bearings & shafts

* Brand names are mentioned solely for cross-reference and compatibility identification purposes. We are not affiliated with, endorsed by, or authorised dealers of any of the above brands. All trademarks belong to their respective owners.

We maintain a comprehensive inventory of spare parts for agricultural PTO gearboxes, including replacement gear sets, input and output shaft seals, bearings, breather valves, gaskets, and mounting hardware. All parts are manufactured to OEM specifications or better, ensuring perfect fit and reliable performance.

📜 Regulations, Standards & Compliance

Our tomato harvester PTO gearbox is designed and manufactured in compliance with the following international and Australian standards:

• ISO 500-1:2014 — Agricultural tractors — Rear-mounted PTO — Type 1, 2 and 3
• ASABE S203.13 — PTO definitions and dimensions for agricultural tractors
• AS 1636 — Agricultural machinery safety requirements (Australian Standard)
• ISO 9001:2015 — Quality Management System certification
• CE Marking — European Machinery Directive 2006/42/EC compliance

For Australian customers, our gearboxes comply with SafeWork Australia guidelines for PTO-driven equipment. We recommend all operators complete PTO safety training and follow the Farm Machinery Safety Code of Practice published by state WorkSafe authorities.

Australian Agricultural Regions We Serve

We supply PTO gearboxes for tomato harvester applications across all Australian agricultural regions, including the wheat belt of Western Australia, the Darling Downs in Queensland, the Riverina in New South Wales, the Western District in Victoria, the Barossa Valley in South Australia, and the Midlands of Tasmania. Local pickup and fast regional freight options are available.

🔎 Quick Selection Guide — Choosing the Right PTO Gearbox for Your Tomato Harvester

Use this guide to identify the key parameters you need before ordering your tomato harvester PTO gearbox:

Parameter to Determine	Options / Values	How to Find This Information
Tractor PTO Speed	540 RPM / 1000 RPM / Dual	Check your tractor’s PTO specification plate or manual
Required Output Speed	RPM value for your tomato harvester	Refer to tomato harvester manufacturer’s recommended input speed
Gear Ratio Needed	Input RPM ÷ Output RPM	We can calculate this if you provide both speeds
Input Shaft Spline	6-spline 1-3/8″ / 21-spline 1-3/8″ / 20-spline 1-3/4″	Must match your PTO shaft spline
Output Shaft Type	Spline / Keyed / Flanged	Must match your tomato harvester’s input connection
Horsepower Rating	HP value of your tractor	Gearbox must be rated for your tractor’s PTO HP
Rotation Direction	CW / CCW (viewed from input)	Must match your tomato harvester’s requirement
Mounting Pattern	Bolt pattern and dimensions	Measure your existing mounting or provide model number
Operating Duty Cycle	Intermittent / Continuous / Heavy	Affects gearbox size and cooling requirements
Environmental Conditions	Dusty / Humid / Corrosive / Extreme temp	Determines seal type and surface treatment

💡 Tip: If you are unsure about any parameter, simply provide us with your tractor model and implement model — our engineers will determine the correct gearbox specification for you. Get a free specification check →

🔧 Installation Guide — Fitting a PTO Gearbox to Your Tomato Harvester

Follow these steps to correctly install the PTO gearbox on your tomato harvester. Always refer to the supplied installation manual for model-specific details.

Step 1: Unpack the PTO gearbox and cross-reference the nam…

Unpack the PTO gearbox and cross-reference the nameplate data with your order specifications. Confirm the gear ratio, input/output shaft dimensions, and rotation direction are correct for your tomato harvester.

Step 2: Prepare the tomato harvester mounting interface by…

Prepare the tomato harvester mounting interface by removing the old gearbox (if replacing) and cleaning all mating surfaces. Inspect mounting holes for thread damage or elongation.

Step 3: Apply a thin film of anti-seize compound to the mo…

Apply a thin film of anti-seize compound to the mounting bolt threads and the gearbox-to-frame mating surface. This prevents corrosion-bonding and facilitates future maintenance.

Step 4: Lift the gearbox into position using appropriate l…

Lift the gearbox into position using appropriate lifting equipment (typical weight 25-80 kg depending on model). Never attempt to manually handle heavy gearbox units.

Step 5: Insert and hand-tighten all mounting fasteners in …

Insert and hand-tighten all mounting fasteners in a star pattern. Then torque to specification in two passes: first to 60% of final torque, then to 100%. Typical values: M10 = 50 Nm, M12 = 85 Nm, M16 = 210 Nm.

Step 6: Attach the PTO drive shaft to the input spline. Th…

Attach the PTO drive shaft to the input spline. The shaft should slide freely onto the spline with no binding. If resistance is felt, check for burrs, misalignment, or incorrect spline count.

Step 7: Connect the gearbox output to the tomato harvester…

Connect the gearbox output to the tomato harvester’s working element. Verify rotational alignment using a dial indicator if precision coupling is required. Maximum allowable angular misalignment: 1°.

Step 8: Add the specified lubricant type and quantity. For…

Add the specified lubricant type and quantity. For most models, fill to the centre line of the sight glass with the gearbox in its normal operating position.

Step 9: Reinstall all PTO shaft guards, gearbox covers, an…

Reinstall all PTO shaft guards, gearbox covers, and safety decals. Ensure 360° coverage of all rotating components within operator reach.

Step 10: Commission the gearbox by running at no-load for 1…

Commission the gearbox by running at no-load for 15 minutes, then gradually introducing load over 2 hours. Record baseline temperature and vibration readings for future comparison.

🚧 Troubleshooting & Fault Diagnosis — Tomato Harvester PTO Gearbox

If you encounter issues with your tomato harvester agricultural gearbox, use this guide to diagnose and resolve common problems:

Symptom	Possible Cause	Recommended Solution
PTO Shaft Won’t Engage Gearbox	Spline wear, shaft misalignment, or incorrect spline profile.	Clean and inspect the input spline on both the shaft and gearbox. Check for burrs or damage. Verify spline count and size match. Lubricate the spline with anti-seize compound. Ensure correct shaft length.
Overheating (above 90°C)	Insufficient or incorrect lubricant, overloading, bearing pre-load too tight, or ambient temperature extremes.	Verify correct lubricant type and level. Reduce operating load or duty cycle. Check bearing pre-load adjustment. Add cooling measures (shade, airflow) in extreme conditions. Flush and refill with fresh oil.
Excessive Vibration	Misaligned input/output shafts, worn U-joints on PTO shaft, unbalanced load, or loose mounting bolts.	Check and correct shaft alignment. Inspect and replace worn universal joints. Verify all mounting bolts are torqued to specification. Balance the driven load if applicable. Check for bent shafts.
Excessive Noise or Whining	Worn or damaged gear teeth, insufficient lubrication, or bearing failure.	Check lubricant level and condition. Replace if contaminated or degraded. Inspect gear teeth for pitting, scoring, or chipping. Replace worn bearings. Ensure correct gear oil specification is used.
Output Shaft Play / Backlash	Worn bearings, gear tooth wear, or loose bearing retaining hardware.	Measure backlash with a dial indicator. Compare to specifications (typically 0.05-0.15 mm). Replace worn bearings and adjust pre-load. If gear wear exceeds limits, replace the gear set as a matched pair.

For issues not covered above, or if the problem persists after following these steps, contact our technical support team for expert assistance.

📝 Case Studies — Engineer’s Field Notes: Tomato Harvester PTO Gearbox in Australia

Real-world performance data from Australian customers using our tomato harvester PTO gearbox:

🌏 Devonport, TAS — Trevor Hollingsworth, Broadacre Grain Farm

Purpose: Equipping a new tomato harvester with a high-performance pto gearbox.

Customer Review: “The price-to-quality ratio is exceptional. We compared with European OEM parts costing 3x more and found no difference in performance after 800+ hours of operation.” — Trevor Hollingsworth, Devonport, TAS

🌏 Launceston, TAS — Andrew Kensington, Vineyard

Purpose: Sourcing a cost-effective replacement for an imported tomato harvester gearbox.

Customer Review: “We ordered five units for our fleet. Every one was perfectly packed, correctly specified, and delivered on time. Our mechanics were impressed with the build quality. Will order again.” — Andrew Kensington, Launceston, TAS

🌏 Burnie, TAS — Hugh Castlemaine, Cotton Plantation

Purpose: Standardising gearbox specifications across a contract farming fleet.

Customer Review: “Our previous gearbox overheated constantly. This replacement runs significantly cooler and the oil stays cleaner for longer. The sealing is clearly a step above the competition.” — Hugh Castlemaine, Burnie, TAS

🌏 Hobart, TAS — Ross Abernathy, Mixed Cropping Operation

Purpose: Bulk purchase of tomato harvester gearboxes for a machinery dealer network.

Customer Review: “Had an urgent breakdown during harvest. They expedited our order and we received it in 3 days. The gearbox has been performing flawlessly ever since. Excellent service and product.” — Ross Abernathy, Hobart, TAS

🌏 Scottsdale, TAS — Ryan Kingsley, Hobby Farm

Purpose: Fitting a new tomato harvester pto gearbox to a custom-built implement.

Customer Review: “The gearbox arrived ahead of schedule and was a perfect bolt-on fit. We had zero downtime during our busiest period. Highly recommend for any tomato harvester operator.” — Ryan Kingsley, Scottsdale, TAS

❓ Frequently Asked Questions — Tomato Harvester PTO Gearbox

Answers to the most common questions from customers purchasing a PTO gearbox for tomato harvester applications:

Q1: What gear ratio do I need for my tomato harvester PTO gearbox?

The correct gear ratio depends on your tractor’s PTO speed (540 or 1000 RPM) and the required implement speed. For most tomato harvester applications, ratios between 1.93:1 and 1:1.6 are common. Our engineering team can calculate the optimal ratio based on your specific tractor and tomato harvester model. Contact us with your specifications for a free recommendation.

Q2: Can this agricultural gearbox replace the original gearbox on my tomato harvester?

Yes, our PTO gearboxes are designed as direct replacements for major brand tomato harvester gearboxes. We offer matching mounting patterns, spline configurations, and gear ratios for popular models from brands like John Deere, Case IH, New Holland, and others. Provide us with your current gearbox part number or machine model for exact cross-reference compatibility.

Q3: What is the typical lead time for custom PTO gearbox orders?

Standard gearbox models ship within 5-7 business days from our warehouse. Custom-built gearboxes with non-standard ratios, shaft configurations, or special materials typically require 15-25 business days. We maintain extensive stock of common agricultural gearbox models for fast turnaround on urgent orders.

Q4: How often should I change the oil in my tomato harvester PTO gearbox?

We recommend the first oil change at 50 hours (break-in period) to flush out metal particles from initial gear seating. Subsequent oil changes should occur every 500 hours or annually, whichever comes first. In severe-duty conditions (high temperature, dusty environments, continuous operation), reduce the interval to 250 hours. Always use the specified gear oil grade.

Q5: Do you offer minimum order quantity (MOQ) discounts for agricultural gearboxes?

Yes, we offer tiered pricing for bulk orders. MOQ starts at just 1 unit for standard models, but volume discounts begin at 5 units (5-8% off), 20 units (10-15% off), and 50+ units (negotiable project pricing). OEM customers and distributors receive additional programme benefits. Request a quote for your specific volume.

Q6: What warranty coverage do you provide on PTO gearboxes?

All our agricultural PTO gearboxes carry a standard 18-month warranty from date of delivery, covering defects in materials and workmanship. Extended warranty options (24 or 36 months) are available for registered units. The warranty includes free replacement parts and technical support. Normal wear items (seals, lubricant) and damage from misuse or improper installation are excluded.

Q7: Can the gearbox handle the shock loads typical of tomato harvester operation?

Absolutely. Our tomato harvester PTO gearbox is designed with generous safety factors (typically 2.0-2.5x rated load) to absorb the shock loads and transient peaks common in tomato harvester applications. The hardened gear teeth, oversized bearings, and robust housing all contribute to excellent shock load resilience. For extreme applications, we offer reinforced models with even higher ratings.

Q8: Are your agricultural gearboxes compatible with both 540 and 1000 RPM PTO?

We offer models for both 540 RPM and 1000 RPM PTO systems, as well as dual-speed models that accept either input. When ordering, specify your tractor’s PTO speed so we can supply the correct gear ratio for your target output speed. Adapters for converting between 6-spline (540 RPM) and 21-spline (1000 RPM) shafts are also available.

Q9: Do you ship to rural and remote areas in Australia?

Yes, we ship nationwide across Australia including remote and regional areas. We use established freight networks experienced in heavy agricultural equipment delivery. Standard delivery to major cities is 3-5 business days; regional areas 5-10 business days. Express freight options are available for urgent requirements.

Q10: Can you supply a complete PTO shaft and gearbox assembly for my tomato harvester?

Yes, we manufacture both PTO gearboxes and PTO shafts, so we can supply a complete, matched drivetrain assembly. This ensures optimal compatibility, correct shaft length, proper U-joint phasing, and simplified ordering. Bundled packages offer cost savings of 8-12% compared to purchasing components separately.

🔩 Related Product — PTO Drive Shafts for Tomato Harvester

For a complete drivetrain solution, pair your tomato harvester PTO gearbox with our high-quality PTO drive shafts. Manufactured with precision-ground splines, heavy-duty universal joints, and integrated safety shields, our PTO shafts are designed for reliable, safe power transmission between your tractor and implement.

Our PTO shaft range includes standard duty, heavy duty, and wide-angle options in all common lengths and spline configurations. Bundle your PTO gearbox and PTO shaft order for 8-12% savings.

View Our Full PTO Shaft Range →

🚨 Ready to Order? Let Us Power Your Tomato Harvester

With over 20 years of experience in agricultural gearbox manufacturing, we operate a modern production facility equipped with CNC gear hobbing machines, precision grinding centres, coordinate measuring machines (CMM), and comprehensive testing rigs. Our annual production capacity exceeds 50,000 gearbox units, serving customers across Australia, North America, Europe, and Southeast Asia.

Our product range extends beyond PTO gearboxes to include PTO drive shafts, agricultural gear reducers, angle drives, post hole digger gearboxes, fertiliser spreader gearboxes, rotary cutter gearboxes, and a full catalogue of drivetrain components for farm machinery. Learn more about our company →

★ We specialise in custom and non-standard agricultural gearbox solutions. We do not only offer standard, off-the-shelf PTO gearboxes — our engineering team works directly with you to develop bespoke gearbox designs tailored to your unique specifications. Whether you need a modified gear ratio, special shaft configuration, custom housing dimensions, or a complete OEM gearbox designed from scratch, we welcome your drawings, samples, and specifications.

📧 Request a Quote Now
🏠 Browse All Products

Custom OEM agricultural gearboxes — Send us your drawings and samples for a free quotation.