製品説明
Sinotruk CHINAMFG 6X4 20m3 25cbm LPG Tanker Bobtail Truck with Dispenser for AA RANO
製品説明
1. Xihu (West Lake) Dis.feng Truck: 260HP CHINAMFG Engine, 8 CHINAMFG & 1 Reverse Gear, 6.5Ton Front Axle & 18Ton Rear Axle.
2. Tank Design: Horizontal cylinder Type, Bullet Tank, with elliptical or hemisphercial dish end.
3. Tank Test: 100% Radio Radiographic Test, Magnetic Power Test, Water Pressure Test, Air Tightness Test.
4. Dispensing System: 2″ Hyrdaulic Truck Pump, 2″ Flow Meter, 15meters Hose Reel for commercial Fillings.
Product Specification
| Item No. | Parameters | |||
| Overall Dimension | 15710*2500*3450 (mm) | |||
| Gross Vehicle Weight | 25000kg | |||
| Curb Weight | 14380kg | |||
| Wheel Base | 4800+1350mm | |||
| Cabin | Left Hand Driving, 2 Passengers Allowed, with Air Conditioner | |||
| Engine | WD615.62 Diesel Engine, 6 Cylinder in line. Four Stroke.water-cooling,supercharged and mid-cooling,Direct injectio | |||
| Engine horsepower | 266 HP Euro II | |||
| Max Driving Speed | 90 km/h | |||
| Gear Box | 10 Forward Gear & 2 Reverse Gear | |||
| Tire | 12R22.5 Tubeless Tire (10 pieces with 1 spare) | |||
| Tank Capacity | 24 CBM / 24,000 Liters | |||
| Filling Weight | 12000kg | |||
| Filling Content | Liquefied Petroleum Gas (Propane) | |||
| Tank Material | Q345R, 10mm Thickness for Tank Body & End plate. | |||
| Standard Equipment | 1 Safety Valves,1 Ball floating Level Gauge, 1 Pressure Gauge, 1 Thermometer, 2 Emergency Shut-off Valve, 1 Tool Boxes, Anti-static Grounding Tape, with 1 valve boxes, |
|||
| Specification | Designed Pressure: 1.61Mpa / 16.1 Bar Hydraulic Test Pressure: 2.21 Mpa / 22.1 Bar Air Tightness Pressure: 1.61Mpa / 16.1Bar Medium Density: 500-590 kg/m3 Working Temperature: under 50 centi-degree Corrosion Allowance: 1mm |
|||
| Filling System |
|
|||
Product Show
Two Types of Dispenser Machine for Optional
Factory Show
Company Introduction
Certificates
Our Overseas Exhibition
| Transmission Type: | Manual |
|---|---|
| Power: | Diesel |
| Load Capacity: | 11-20t |
| Emission Standard: | Euro 2 |
| Tank Volume: | 15001-30000L |
| Drive Wheel: | 6×4 |
| Customization: |
Available
| Customized Request |
|---|
マイターギアボックスの使用における課題
マイターギアボックスには様々な利点がある一方で、対処すべき課題もいくつか存在する。
潤滑： マイターギアボックスでは、ギア歯間の摩擦、発熱、摩耗を最小限に抑えるために、適切な潤滑が不可欠です。ギアボックス内の潤滑を常に十分に保つことは、特に密閉された場所や手の届きにくい場所では困難な場合があります。
メンテナンス： マイターギアボックスは、最適な性能と長寿命を確保するために定期的なメンテナンスが必要です。メンテナンス作業には、潤滑油の点検と補充、ギア歯の摩耗検査、経年劣化により発生する可能性のある位置ずれや取り付け不良の対処などが含まれます。
反発： バックラッシュ、つまり歯車間の隙間は、動作伝達の精度に影響を与える可能性があります。バックラッシュが大きすぎると、高精度が求められる用途において、精度低下や位置決め誤差につながる可能性があります。
複雑な設計： マイターギアボックスは、他のタイプのギアボックスに比べて設計が複雑なため、製造、組み立て、メンテナンスがより難しくなる場合があります。この複雑さゆえに、製造コストとメンテナンスコストが高くなる可能性もあります。
効率損失： マイターギアボックスは、摩擦や芯ずれなどの要因により効率損失が発生する場合があります。これらの損失は動力伝達全体の効率を低下させ、エネルギーの無駄につながります。
スペースの制約： 用途によっては、特に所望の動作方向変更を実現するために大きなギア比が必要な場合、マイターギアボックスを組み込む際にスペースの制約が課題となることがあります。
衝撃荷重： 急激な衝撃荷重や高い衝撃力が加わる用途では、マイターギアボックスにとって課題となる場合があります。こうした課題に対処するためには、衝撃吸収部品の使用や耐久性を高める設計など、適切な対策が必要となる可能性があります。
位置合わせと取り付け： マイターギアボックスの適切な位置合わせと取り付けは、スムーズな動作を確保し、早期摩耗を防ぐために非常に重要です。特に、アクセスが制限された場所や複雑な形状の設置場所では、正確な位置合わせを実現するのは困難な場合があります。
費用に関する考慮事項： マイターギアボックスは、設計の複雑さや製造要件から、よりシンプルなタイプのギアボックスに比べてコストが高くなる場合があります。選定プロセスにおいては、マイターギアボックスの利点とそれに伴うコストのバランスを考慮することが不可欠です。
これらの課題に対処するには、綿密な設計、適切なメンテナンス、そして特定の用途要件への配慮が必要となる場合が多い。課題はあるものの、マイターギアボックスは、その独自の動作方向変更機能が有利となる様々な産業において、依然として重要な部品である。
Differences Between Miter Gearboxes and Other Types of Gearboxes
Miter gearboxes possess distinct characteristics that differentiate them from other types of gearboxes, such as helical, spur, and planetary gearboxes. These differences contribute to their unique capabilities and suitability for specific applications:
- Gear Arrangement: Miter gearboxes utilize bevel gears that intersect at a 90-degree angle. In contrast, helical and spur gearboxes use parallel or co-planar gear arrangements, and planetary gearboxes feature multiple gears arranged around a central sun gear.
- Motion Direction Change: Miter gearboxes excel at changing the direction of rotational motion by 90 degrees. Other gearboxes may change motion direction by different angles or maintain the same direction.
- Compactness: Miter gearboxes are known for their compact design, making them suitable for applications with limited space. Planetary gearboxes, while compact, have a different internal structure.
- Backlash Control: Miter gearboxes are designed to minimize backlash and ensure accurate motion transfer. Helical and spur gearboxes may have more backlash due to their gear arrangement, while planetary gearboxes can provide good backlash control.
- Torque and Speed: Different gearboxes vary in their torque and speed capabilities. Miter gearboxes are suitable for moderate torque and speed applications, while planetary gearboxes offer high torque density.
- Applications: Miter gearboxes are commonly used for applications requiring 90-degree changes in motion direction, such as conveyor systems, printing machinery, and some types of industrial equipment. Helical and spur gearboxes are prevalent in various machinery and equipment. Planetary gearboxes find use in robotics, aerospace, and heavy machinery.
Each type of gearbox has its own advantages and is chosen based on the specific requirements of the application, including space constraints, motion control precision, torque, and speed needs.
Changing Direction of Rotational Motion with Miter Gearboxes
Miter gearboxes are specialized mechanical devices designed to efficiently change the direction of rotational motion by 90 degrees. They achieve this transformation through the use of bevel gears with intersecting shafts:
- Bevel Gears: Miter gearboxes utilize bevel gears, which have conical-shaped teeth. These gears are cut at an angle to the gear’s face and allow the transmission of motion between two intersecting shafts positioned at a 90-degree angle to each other.
- Intersecting Shafts: The input and output shafts of a miter gearbox are positioned in such a way that they intersect at a right angle. The bevel gears are mounted on these shafts, and when the input shaft rotates, it engages with the teeth of the bevel gear on the output shaft, transferring motion at a right angle.
- Directional Change: As the input shaft rotates, the bevel gear’s teeth mesh and transmit motion from the input shaft to the output shaft. This interaction causes a change in the direction of rotation, redirecting the output motion perpendicular to the input motion.
- コンパクトなデザイン： Miter gearboxes are known for their compact and space-saving design. The intersecting shafts and bevel gears are housed within the gearbox casing, allowing for efficient motion redirection without the need for additional external components.
Overall, miter gearboxes play a crucial role in changing the direction of rotational motion, making them essential components in various mechanical systems where motion needs to be redirected efficiently and precisely.
editor by CX 2023-10-23
