The particularly sturdy sizes K..39 and K..49 complete our selection of two-stage helical-bevel gear units. They set the standards together with sizes K..19 and K..29: four sizes enable torques from 80 Nm to 500 Nm.<\/p>\n
With their high efficiency in both directions of rotation and at any input speed, these right-angle gear units are extremely energy-efficient. Their high-endurance gearing is wear-free and lasts a equipment unit’s lifetime. For precise positioning tasks, you may use the K series gear units with reduced backlash.<\/p>\n
Nominal torque: 53 – 20000 Nm
Rated power: 0.12 – 90 kW
Ratio: 5.5 – 8900
K series helical-bevel gear units: high amount of efficiency and gearing with high fatigue strength
K series helical-bevel gear units
The figure shows a gearmotor with a helical-bevel gear unit
The compact design of all our gear units is most apparent in our helical-bevel gear units. This real estate is particularly interesting, for example, for machine applications with limited space available. Here, you need effective drive technology with a compact design. This is just the right environment for our helical-bevel gear units with a torque range between 80 to 50,000 Nm.<\/p>\n
In combination with an IE4 synchronous electric motor, our two-stage bevel gear units become the energy conserving LogiDrive system for intralogistics. LogiDrive drive devices have a large overload capacity and help reduce operating costs thanks to their high efficiency. ![](\"https:\/\/5.imimg.com\/data5\/XB\/TR\/MY-20178641\/helical-level-gearbox-500x500.jpg\")
Due to their modular framework, users also achieve considerable cost savings in maintenance costs.
The compact and optimized housings of the helical bevel gears distinguish themselves by being machined on all sides and are therefore ready for a number of installation options and applications. Various standard shaft executions and the double chamber shaft seals are prepared for use.<\/p>\n
Helical Bevel gear motors for intralogistics<\/p>\n