{"id":1186,"date":"2020-03-20T03:47:51","date_gmt":"2020-03-20T03:47:51","guid":{"rendered":"http:\/\/ptogearbox.xyz\/?p=1186"},"modified":"2020-03-20T03:47:51","modified_gmt":"2020-03-20T03:47:51","slug":"worm-reduction-2","status":"publish","type":"post","link":"https:\/\/ptogearbox.xyz\/kk\/%d2%9b%d0%be%d0%bb%d0%b4%d0%b0%d0%bd%d0%b1%d0%b0\/worm-reduction-2\/","title":{"rendered":"worm reduction"},"content":{"rendered":"

worm reduction
Our regular 700 Series – the heart of EP quickness reducer product line – has been serving industry reliably for over a decade. Its proven modular design has set the sector standard for functionality and is the most imitated product in today’s worm gear speed reducer market. But why settle for a knock-off when you’re able to have the original – from EP.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1\/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1\/2″ to 2-1\/4″
Hollow result bore diameters from 5\/8″ to 3-7\/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for much longer operating life.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure confident, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, in addition to greater precision during worm and gear alignment.
EP 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for large torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
EP worm gearboxes have earned a status to be an industry benchmark worldwide. Our achievement came from our relentless get for quality with state-of-the-artwork technology, all and will be offering worm gearboxes are affordable prices. High flexibility accorded through a broad choice of mounting options, shaft configurations and engine interfaces, causes the EP worm gearbox the default decision for the industry. The helical-worm and the double-worm edition, with or without the torque limiter, add up to the advantage, creating a highly versatile drive system.
EP Worm gearboxes provide excessive torque with low quickness gear ratio. Being basic and compact in design, these gears can achieve higher gear ratio than the helical gears. These worm reduction<\/a> gears having screw type qualities act like helical gears, but its helix angle is typically comparatively larger) and its body is generally quite lengthy in the axial direction. The gears in these gearboxes could be right or left-handed dependant on the purpose.
Mounting choice include universal housing, side flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (solitary or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm is usually shaped such as a screw and the worm wheel is certainly a kind of gear machined to get a tooth profile with the same configuration.
The operation of a worm gear is similar with that of a bolt and nut. The principle is equivalent to a nut that is fixed to ensure that it cannot rotate and for that reason progresses in the axial path when the bolt is usually turned.
The design of a worm gear is considered through the relationship between the rack and spur gear on the middle plane of the worm wheel.
Features
Substantial reduction ratio\tOne rotation of the worm rotates the worm wheel simply by one tooth. For this reason, in a 1 speed decrease gears, the wheel could be manufactured so that it will be rotated 1\/60 (1\/120 in special applications).
Orthogonal shaft\tThe shafts are aligned orthogonally due to the structure. This feature can help you layout the turning transmission direction at the right angle.
The arbitrariness of the rotation direction\tThe screw direction of the worm could be clockwise or counterclockwise (generally clockwise). You’ll be able to transformation the rotation path of the worm wheel by changing the screw path.
A wide variety of shaft layouts\tThe wide variety of shaft layouts is among the features of interlocking gears.For instance, right shaft output, still left shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Determine 2) and, if attachment orientations are included, you’ll be able to select from over 40 layouts.
Low noise, low vibration\tThe interlocking of the worm and worm wheel is definitely characteristic since the contact can be linear and the relative slide is great. In comparison to rolling power transmission, noise and vibration are really low. For this reason, this technology is used to drive medical equipment, elevators and escalators, etc.
The primary specifications of worm reduction gears
MA Series(Small)
Center distance(mm)\t32,40
Reduction ratio\t10,20,30,40,50,60
Input capacity(kW)\t0.1\uff5e1(at an input of 1800 rpm)
Output torque(N\u30fbm)\t20\uff5e66
Input speed(rpm)\t0\uff5e1800
MA Series(Medium)
Center distance(mm)\t50,63,80,100,125,140,160
Reduction ratio\t10,15,20,25,30,40,50,60
Input capacity(kW)\t0.4\uff5e30(at an input of 1800 rpm)
Output torque(N\u30fbm)\t900\uff5e3570
Input speed(rpm)\t0\uff5e1800
S Series
Center distance(mm)\t50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio\t10,15,20,25,30,40,50,60
Input capacity(kW)\t0.3\uff5e255(at an input of 1800 rpm)
Output torque(N\u30fbm)\t50\uff5e56600
Input speed(rpm)\t0\uff5e1800
Key points when choosing a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the correct gear are described in the manufacturer catalogs and the series and models should be selected according to those procedures. Particular care ought to be taken in crucial areas such as selecting the load index, calculating the overhang load and examining heat rated potential from the manufacturer.
Cautions during use
When using a worm decrease gears, the heat produced through the initial amount of use is large and running-in procedure at 1\/4, 1\/2 and 3\/4 of rated torque for eight hour periods is paramount to sufficiently attaining the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to improve the lubricating oil and also to change the lubricating oil after that about 1 time each year according to the procedure manual given by the manufacturer.
\u04e8\u043d\u0456\u043c \u0441\u0438\u043f\u0430\u0442\u0442\u0430\u043c\u0430\u0441\u044b
The Worm Reduction Gear Box is supplied by our company is of supreme quality. Our products are made through the use of premium quality materials and advance technology at our vendors end. They are widely used in a variety of sectors. Our products are easily available at an extremely low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A good-160 B5 Framework, Flange Mount.
Option B-132 B14 Frame, Face Mount.
Option C-100\/112 B5 Frame, Flange Attach.
High efficiency and secure operation. High load capacity and overload functions. Result Torque = (Power (kW) x 9550 (Regular))\/ Gearbox result speed (rpm).
Higher ratios available on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are actually milestones for the sector worldwide. They succeeded in combining uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute flexibility is given by the wide choice of several mounting options, shaft configurations and engine interface, all offered as regular. The helicalworm and the doubleworm edition, with or without the torque limiter, also add up, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP\t
0.42 A
EFFICIENCY\t
84%
HP\t
0.12
KW\t
0.09
RATIO\t
7
RPM\t
200
TEMPERATURE RATING\t
20 level C TO 80 degree C
TORQUE\t
4 Nm
HSN\t
8483.40.00
WARRANTY PERIOD\t
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, featuring a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) offers great versatility to match a broad selection of applications and higher efficiency than the compact line XC, where the emphasis is on space efficiency.
Series H offers the same features since series X with an extra plus: a spur equipment pre-stage at the insight end provides higher performance and a good broader range of ratios than the X series.
Frame sizes 110 and 90 feature a cast-iron casing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow output shaft is supplied as standard.
Broad range of options available:
second input, output flange, single or double extension result shaft, torque limiter with through cable, torque arm.<\/p>","protected":false},"excerpt":{"rendered":"

worm reductionOur regular 700 Series – the heart of EP quickness reducer product line – has been serving industry reliably for over a decade. Its proven modular design has set the sector standard for functionality and is the most imitated product in today’s worm gear speed reducer market. But why settle for a knock-off when […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"status","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-1186","post","type-post","status-publish","format-status","hentry","category-ptogearbox","post_format-post-format-status"],"_links":{"self":[{"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/posts\/1186","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/comments?post=1186"}],"version-history":[{"count":1,"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/posts\/1186\/revisions"}],"predecessor-version":[{"id":1187,"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/posts\/1186\/revisions\/1187"}],"wp:attachment":[{"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/media?parent=1186"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/categories?post=1186"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ptogearbox.xyz\/kk\/wp-json\/wp\/v2\/tags?post=1186"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}