製品説明
製品説明
hole output low backlash mechanical speed variator Planetary Speed Reducer small gearbox price
HangZhou Fubao Electromechanical Technology Co., Ltd. mechanical speed variator Planetary Speed Reducer small gearbox is a new generation of practical products independently developed by our company:
Low noise: less than 65db.
Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.
High torque: higher than the standard planetary reducer torque.
High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.
High deceleration ratio: Modular design, planetary gearbox can be interlinked.
mechanical speed variator Planetary Speed Reducer small gearbox characteristic:
1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the mechanical speed variator Planetary Speed Reducer small gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.
2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.
3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.
4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
Compared with other reduction machines, mechanical speed variator Planetary Speed Reducer small gearbox machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.
Because of these characteristics,mechanical speed variator Planetary Speed Reducer small gearbox is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.
製品パラメータ
| WGK series parameters | Model number | WGK060 | WGK085 | WGK115 | WGK160 |
| Rated output torque | 12~40Nm | 40~135Nm | 90~335Nm | 270~900Nm | |
| Reduction ratio | L1:3,4,5,7,8,10 L2:12,16,20,25,28,32,35,40,56,64,70 L3:80,100,125,140,160,175,200,250,280,320,350,500,512,700,1000 |
||||
| Planetary gear backlash | L1:8arc.min L2:10arc.min L3:12arc.min | ||||
Detailed Photos
Product Details
Other products
会社概要
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.
Factory Display
FAQ
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
| 応用： | Motor, Machinery, Agricultural Machinery, Packaging Machinery |
|---|---|
| 硬度： | 硬化した歯面 |
| インストール: | 横型 |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
マイターギアボックスにおける最大トルク処理能力の限界
マイターギアボックスは、他の機械部品と同様に、処理できる最大トルクに制限があります。
材料強度: マイターギアボックスのトルク処理能力は、その構造に使用される材料の強度と耐久性に影響されます。材料の強度が十分でない場合、高トルク負荷下で変形したり破損したりする可能性があります。
歯車の歯の設計： 歯車の歯の形状と構造は、トルク伝達において極めて重要な役割を果たします。マイターギアボックスでは、歯車の歯のサイズ、形状、角度がトルク伝達能力に影響を与えます。歯車の歯の設計が不適切だと、早期摩耗やトルク伝達能力の低下につながる可能性があります。
潤滑と冷却： 適切な潤滑は、運転中に発生する摩擦と熱を低減するために不可欠です。潤滑が不十分だと、摩擦の増加、熱の蓄積、ギアの損傷につながり、ギアボックスのトルク容量が制限される可能性があります。
動的負荷係数： ギアボックスにかかる負荷の種類（衝撃荷重やトルクの急激な変化など）は、そのトルク処理能力に影響を与える可能性があります。高い動的負荷はギアボックスの許容能力を超え、故障につながる可能性があります。
取り付けとサポート： 機械システム内におけるマイターギアボックスの取り付けと支持方法は、そのトルク処理能力に影響を与える可能性があります。支持が不十分なギアボックスは、位置ずれや過度の応力が発生し、トルク処理能力の低下につながる可能性があります。
サイズと構成： マイターギアボックスの物理的なサイズと構成は、トルク処理能力に影響を与える可能性があります。より堅牢な部品を使用した大型ギアボックスは、小型またはコンパクトな設計のものに比べて、より高いトルク制限値を持つ場合があります。
動作条件： 温度、湿度、振動などの環境要因は、マイターギアボックスのトルク容量に影響を与える可能性があります。極端な条件下では、材料の劣化や潤滑効率の低下が生じ、ギアボックス全体のトルク処理能力が低下する可能性があります。
製造公差： 製造工程や公差のばらつきにより、個々のギアボックス間でトルク容量に差が生じる可能性があります。一般的に、製造公差が厳しいほど、より高いトルク容量が得られます。
特定の用途向けにマイターギアボックスを選定・設計する際には、これらの制約を考慮することが重要です。適切な設計、材料選定、潤滑、および運転条件は、マイターギアボックスが意図したトルク制限内で動作し、信頼性の高い性能を発揮するために重要な役割を果たします。
Miter Gearboxes in Robotics and Automation Applications
Miter gearboxes are indeed utilized in robotics and automation applications, leveraging their unique capabilities for precise motion control and direction change:
Precision Motion: In robotics, miter gearboxes can be employed to achieve precise and accurate motion at right angles, allowing robots to perform intricate tasks with accuracy.
Joint and Arm Movements: Robotic arms often require precise movement and control at various angles. Miter gearboxes enable smooth and controlled motion changes, contributing to the versatility of robotic arms.
Direction Change: Many automation systems involve the need to change the direction of motion, such as conveyors or assembly lines. Miter gearboxes efficiently handle these changes, ensuring seamless operation.
Space Optimization: Robots and automated systems often operate in confined spaces. Miter gearboxes’ compact design makes them suitable for integrating into space-constrained environments.
Responsive Control: Automation applications demand responsiveness and accurate control. Miter gearboxes provide the necessary motion control for timely and precise execution of tasks.
Noise Reduction: In robotics and automation, quiet operation is essential. Miter gearboxes, with reduced backlash and noise, contribute to a quieter working environment.
Miter gearboxes play a crucial role in enhancing the efficiency, accuracy, and versatility of robotics and automation systems by facilitating controlled motion changes and direction shifts.
マイターギアボックスにおける高速・高負荷用途への対応
マイターギアボックスは、高速かつ高負荷な用途を含む幅広い用途に対応できる汎用性の高い機械部品です。特定の用途におけるマイターギアボックスの適合性は、設計、材質、潤滑、および全体的なエンジニアリング上の考慮事項など、さまざまな要因によって決まります。
高速用途においては、マイターギアボックスは様々な産業で一般的な回転速度に対応できるよう設計・製造されます。適切に設計されたマイターギアボックスは、歯形、潤滑、材料選定などの要素を考慮し、摩擦、発熱、摩耗を最小限に抑えることで、高速回転時でも効率的かつ信頼性の高い動作を実現します。
同様に、マイターギアボックスも高負荷用途に対応できるよう設計できます。耐久性のある素材、精密な機械加工、堅牢なベアリング配置を採用することで、マイターギアボックスは構造的な完全性を維持しながら、高レベルのトルクを効率的に伝達できます。マイターギアボックスのベベルギア配置は、重負荷をギア歯全体に均等に分散させるのに適しており、スムーズで安定した動力伝達を保証します。
マイターギアボックスの具体的な設計と性能は、メーカーや用途によって異なることに注意が必要です。エンジニアや設計者は、ギア比、ベアリング配置、ハウジング材料を最適化することで、高速回転、高負荷、あるいはその両方といった用途の要求にマイターギアボックスが対応できるように努めています。
最終的に、マイターギアボックスは幅広い運転条件下で信頼性の高い性能を発揮できるため、様々な産業や用途において汎用性の高い選択肢となります。
editor by CX 2023-10-17
