Small Precison Worm Decrease Gearboxes
There are numerous of specifications you will have to consider when coming up with a worm gearbox selection.
First, what’s the input and output torque requirements? Next, check vendor horsepower/torque charts and pick the correct worm gear reducer.
If the size of the gearbox will likely be an important consideration after that check the reducer dimension specs, not all producers make compact units. Actually, working with the right supplier can help you not only find the right equipment reducer but also prevent some of the most typical errors in reducer selection. We provide a free guide to assist you find the appropriate supplier to utilize.
For low and fractional horsepower software you can expect two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output are the major distinctions between both of these models. Both feature either a hollow or solid result shaft. Both models are compact and provide users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or project is vital to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes on top and bottom
• Flush fitting bearing caps simple to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is necessary. This right angle equipment motor is indeed versatile it can work just about anywhere.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using small worm gearbox Miniature gears, Ever-Power has designed and built unique, high accuracy mini gearboxes that can’t be found anywhere else. Our miniature gearboxes are available in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide customized micro gearboxes that were created and created to meet your specific specifications.
E mail us for the mini gearbox the application requires, or request a quote upon a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, swiftness reducers, equipment drives, and gearmotors. All conditions can be used more or less interchangeably. Please be aware that the links for our small gear drives include information on the full selection of framework sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel container miniature equipment drives are application rated for the maximum balance of functionality and cost. Torque could be balanced to meet up your RPM and operating life requirements. Lightweight with low backlash overall performance (as little as 1°, with option of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a compact package. They offer an result shaft at 90° from the input, and so are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from opposite sides of the housing; output is definitely a keyed bore. Standard one- and double-end shafts can be found and supplied with keys and retainer rings. An array of gear ratios and input sizes can be found to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and permanent lubrication. They provide two input shafts on opposing sides of the body, with two result shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high effectiveness functionality with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the insight. They deliver superior overall performance in a wide variety applications and are constructed with small footprints, making them ideal for functions where space is limited. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes tough and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm gear reducers deliver superior performance with high efficiency, and show rugged construction for challenging power transfer operations. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely small footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and manufacture a customized miniature gearbox to meet up your unique specs. We can produce custom micro gearboxes in virtually any configuration your application requires, with result torque levels as high as 900Nm. We are able to work from your own gearbox styles, reverse engineer a preexisting unit, or help you develop an all-new design that delivers the performance you need. Ask for a quote on a custom miniature gearbox or contact us to discuss your unique requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive important and retainer rings can be supplied to your specs for any of our hollow bore miniature gearboxes. We provide a basic selection of solitary ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your particular needs.
We offer a broad collection of misalignment shaft couplings in in . and metric bore sizes. ” and metric precision surface shafts are available from 
stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox experts. All of our micro gear drive versions deliver superior performance in a small footprint, and are rugged enough for challenging function environments. E mail us to learn more about our mini gearboxes, or ask for a quote on a custom made model that’s tailored to your preferences.
Additional advantages of worm drive gearboxes include:
