Materials Managing Energy UNIT 2
Basic Description
This electrical power unit capabilities power up gravity down circuit. Activate the start off solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve with all the reducing velocity controlled by the pressure compensated flow management valve. Solutions of this series is usually extensively utilized in the marketplace of logistic devices such as fork lift, mini lift table, etc.
Special Notes
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned just before mounting the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which need to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
four. Oil shifting is required immediately after the first 100 operation hrs,afterwards once just about every 3000 hrs.
5. The electrical power unit ought to be mounted horizontally.
Material Dealing with Energy UNIT one
General Description
This electrical power unit is made for your fork lift marketplace, 
consisting of highly efficient gear pump, DC motor, guide raise and reduced valve, tank, ect. The up and down movement are controlled from the lever on the manual release valve, that’s outfitted with an electrical switch to activate the motor. The lowing velocity is controlled from the stress compensated flow handle valve.
Distinctive Notes
1. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all the hydraulic elements concerned just before set up of the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which should really also be clean and absolutely free of impurities, N46 hydraulic oil is advised .
4. Oil shifting is required right after the first one hundred operation hours, afterwards when every 3000 hours.
five. The electrical power unit proven is created to be mounted horizontally.
