helical worm gear motor
\nHelical-worm gearmotors
\nDue to their design and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and therefore avoid high noise emission levels.
\nLow-noise continuous operation: gear unit combination optimized with respect to efficiency
\nDo you anticipate a drive solution to impress you with its high level of overall performance and efficiency? In that case, we’d recommend our high-quality helical-worm gearmotors EP for you. These could be implemented separately in the modular program. In this way, they offer you a massive range of sizes, equipment ratios and motor sizes.
\nHowever, their greatest power is definitely their running smoothness and their incredibly low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you opting for a powerful drive solution that you will hardly actually hear.
\nThe overall concept also offers you a lot more practical product characteristics and benefits. Included in these are the significantly higher efficiency of the helical-worm combinations instead of single helical-worm gear systems. This is how you save additional energy in the procedure of your systems and so are able to noticeably reduce ongoing operating costs.
\nYou will receive the low-noise helical-worm gearmotors EP. – to fit your individual requirements – with an array of AC motors. Furthermore, you can freely configure all of the relevant properties. In this manner, you can effectively make use of all the benefits provided by this combination of low-noise helical-worm equipment unit and performance-optimized electric motor. Even greater variance may be accomplished thanks to the optional flange or foot-mounted style and by choosing between solid and hollow shaft.
\nSave money and time
\nBy opting for one of our gearmotors, you are already saving time and money with this selection and project planning. The reason being our modular system enables a multitude of combination options for gear models and motors. You can consequently reduce operating costs, depend on an extended service life and benefit from simplified maintenance that is feature of our brand.
\nHelical-worm gear units
\nHelical-worm combinations with significantly better efficiency than solitary helical-worm gear units
\nVery low-noise operation
\nAvailable variants:
\nFoot- or flange-mounted
\nB5 or B14 flange-mounted
\nSolid or hollow shaft
\nHollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
\nMore on helical-worm equipment units of series EP
\nAC motors
\nCombine the helical-worm gear unit with our AC motors:
\nCharacteristics
\nQuiet and dependable transmission of torque
\nHigh overload capacity
\nHardened steel worm equipment and bronze alloy worm steering wheel provide exceptional durability and lengthy service life.
\nOptional durable bearings deliver high radial and axial load capacity
\nHigh strength cast iron housing (SK02050 – SK43125)
\nLightweight, corrosion-resistant aluminum alloy housing (SK02040.1)
\nApplication Specific Solutions
\nFields of use
\nIntralogistics
\nMaterial handling
\nPresses
\nVersion
\nSolid and Hollow shaft (keyed, shrink disc ) Designs
\nObtainable in footed, shaft install or flange mounted configurations
\nRight Angled gear units
\nYour advantages
\nEconomical operation
\nLow noise
\nHigh permitted overhung loads
\nHelical-worm Gearmotor S Series
\nS series
\nEver-Power helical-worm gear units are helical\/helical-worm combinations, so they are better than normal helical-worm equipment units. Because of their outstanding efficiency, these drives can be utilized in every industrial sector and tailored to individual torque and quickness requirements. The reduction ratios afforded by the helical-worm gear stage and the reduced noise levels during operation make these gearmotors ideal low-cost solutions for simple applications.
\nAvailable versions:
\nFoot-mounted or flange-mounted
\nB5 or B14 Flange-mounted
\nSolid or hollow shaft
\nHollow shaft with keyed connection, shrink disc, splined hollow shaft
\nHelical worm geared motors
\nTough, compact, eye-catching!
\nDue to the unique combination of optimized worm wheel materials with particular lubricants, optimized shape, this powerful engine achieves high degrees of efficiency and torque. The casing machined on all sides enables diverse mounting options. Dual chamber shaft seals are used as standard.
\nThe low contour design makes it ideal for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
\nTechnical Data
\nNumber of sizes:6
\nPower Range:0.12 – 7.5kW
\nOutput torque range:50 – 1,300Nm
\nRatio:3 – 3,400
\nOutput option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
\nAssembly\/installation:uniblock, flange, torque arm, foot
\nCourse 12 Helical and hardened and surface worm gears: Provides higher efficiencies and greater torque capacity in smaller sizes.
\nMultiple Input Options: Essential gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
\nMultiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, mounting pilots and flanges provide a wide range of design solutions.
\nUNIBLOCK Housing: For maximum rigidity universal installation on five sides or with a torque arm.
\nSealed for Washdown: Continues contaminants and water out.
\nWorldwide Motor: Multiple leads and windings for worldwide multi volt\/Hz requirements plus modular design to accept brakes, encoders or forced cooling.
\nEP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors set new criteria for reliability, efficiency and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration at this point and a future proof answer. The EP gear motor offers total versatility in mounting options includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in option positions rotated in 90\u00ba steps around the motor frame providing for unparalleled integration opportunities.
\nEP gear motors comply with UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a genuine total answer for our global customers.
\nSuperior protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dust tight and hose proof,and can be used outside or in wet and dusty environments without the use of additional enclosures. Full rated output is offered by the result shaft of the machine.
\nProduct Features
\nPower rating up to 5,5 kW.
\nTorque 25 … 1.000 Nm
\nOutput Speeds 0,2 … 300 min-1
\nversatile installation possibilities
\nCompletely enclosed, sealed against dust and water spray
\nLubrication change 1st after 15000 hrs
\nLow noise gearing
\nMains connection 110 … 690V, 50\/60Hz
\nEnclosure IP65 (Regular), IP66 (Optional)
\nConnection Regular with CAGE CLAMP\u00ae
\nAdditional features:
\nConnecting with Plug connectors.
\nWith integrated inverter up to 7,5kW.
\nEP-Mark
\nCSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
\nMotors according to EN 60034
\nCorrosion category predicated on DIN ISO 12944-5
\nC1, C2, C3, C4, C5-We, C5-M
\nDue to the unique mixture of optimized worm wheel material with special lubricants and optimized form, this powerful geared engine achieves high degrees of effectiveness and torque. The reduced contour design helps it be suitable for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
\nNominal torque: 50 – 1300 Nm
\nRated power: 0.12 – 7.5 kW
\nRatio: 3 – 3400
\nThe 800BR contains a wide selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The utilization of condition of the art helical and worm gear combinations affords optimum functionality fulfilling a wide variety of ratio requirements. The 800 BR is definitely functionally interchangeable with many major manufacturer\u2019s drives.
\nSPECIFICATIONS
\nDouble and triple reduction ratios from 8:1 to 900:1,
\n4 case sizes – 830, 840, 850, 860
\nAll devices shipped pre-lubed for your unique installation position with KluberSYNTH UH1 6-460
\nAvailable in NEMA C-face flanged and immediate input
\nProjecting and hollow output shafts
\nAvailable accessories
\nOutput flange kits
\nTorque arm kits
\nBase kits
\nOutput shaft kits
\nProduct Features
\nAvailable in nontoxic white (BK) and stainless epoxy finish (SBK)
\nObtainable in hollow or projecting output shafts
\nDouble and triple reduction ratios
\nFlanged or foot mounted
\nAll products adaptable to floor, sidewall or ceiling mounting
\nHelical worm geared motor
\n0,12 – 5,5 kW
\n4 – 996 Nm \/ 6 – 316 rpm
\nStober MGS S helical worm geared motor
\nEfficient small right-angle geared motor. A favorably priced option for the standard duties expected of a right-position drive.
\n5 gear sizes (S0 to S4).
\nElectric motor power 0.12 to 5.5 kW.
\nRated torque of 23 to 800 Nm.
\nGear ratios from we = 6 to 680.
\nBacklash smaller than 20 arcmin.
\nModular, torsionally stiff , leak-proof design.
\nHelical worm geared motors available with:
\nSolid shaft with keyway.
\nHollow shaft with keyway, optional with cover.
\nHollow shaft with shrink disk, optional with cover.
\nGear device and AC motor are directly flange mounted, the pinion is upon the electric motor shaft. This integrated compact design is an essential aspect for the high accuracy and the incredible stiffness of EP geared motors.
\nFor vector-controlled inverter operation utilization of an incremental encoder is provided for as standard.
\nWorm gearboxes and helical worm gearboxes \/ geared motors (S and SS)
\nThe degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are produced from case hardened alloy steel and the flanks are precision ground. The worm wheels are made from particular wear-resistant bronze. Helical worm gears include a helical equipment. Worm gears with shrink disc, torque limiter, in addition to adjustable backlash styles are also part of our standard item range.
\nWorm gearboxes and helical worm gearboxes type S and SS are high-Performance gearboxes in universal design. The housings are produced from top quality cast iron. The rugget wall space and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The external ripping offers a rapid heat conducting.
\nType S und SS
\nTechnical characteristics:
\nOptimised size\/performance ratio
\nDesigned for permanent operation under rough circumstances
\nAbove average lifespan
\nHousing produced from high quality grey cast iron with tough walls and internal ribbing
\nSevere torsional resistance and low noise
\nCase hardened worm shafts and worms with precision ground flanks
\nWorm wheels created from unique bronze
\nSuperior smooth operation
\nSpace saving angular drive
\nHelical worm gearboxes built with helical gear wheel
\nLow engine speeds
\nOptions:
\nBasic mounting, flange mounting or universal design
\nOutput shaft available as solid shaft or hollow shaft
\nShrink disc, torque limiter,along with adjustable backlash
\nSecond shaft end for fitting encoders or brakes
\nTorque arm
\nIEC-adaptor
\nNEMA version
\nFree input shaft
\nATEX specification according to directive 94\/9\/EG<\/p>","protected":false},"excerpt":{"rendered":"
helical worm gear motor Helical-worm gearmotors Due to their design and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and therefore avoid high noise emission levels. Low-noise continuous operation: gear unit combination optimized with respect to efficiency Do you anticipate a drive […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"status","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-1182","post","type-post","status-publish","format-status","hentry","category-ptogearbox","post_format-post-format-status"],"_links":{"self":[{"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/posts\/1182","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/comments?post=1182"}],"version-history":[{"count":1,"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/posts\/1182\/revisions"}],"predecessor-version":[{"id":1183,"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/posts\/1182\/revisions\/1183"}],"wp:attachment":[{"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/media?parent=1182"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/categories?post=1182"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ptogearbox.xyz\/hi\/wp-json\/wp\/v2\/tags?post=1182"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}