{"id":1190,"date":"2020-03-23T03:44:24","date_gmt":"2020-03-23T03:44:24","guid":{"rendered":"http:\/\/ptogearbox.xyz\/?p=1190"},"modified":"2020-03-23T03:44:24","modified_gmt":"2020-03-23T03:44:24","slug":"worm-motor","status":"publish","type":"post","link":"https:\/\/ptogearbox.xyz\/es\/solicitud\/worm-motor\/","title":{"rendered":"worm motor"},"content":{"rendered":"

Worm travel gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where an easy to fit, high torque result is required. Great for student based assignments including robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. cutting down to size. The motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and other applications where high torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, also at very low voltages. We advise that you use stall-detection sensors, or just watch your robot, to ensure that it doesn\u2019t stall for more than a few seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on the smaller threaded end of the shaft, although it is not especially designed to work with this kind of shaft (the hub\u2019s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors established new criteria for reliability, performance and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration today and a truly future proof answer. The Ever-Power gear engine offers total versatility in mounting options includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in alternate positions rotated in 90\u00ba steps around the electric motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total remedy for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty conditions without the use of additional enclosures. Full rated output is offered by the result shaft of the machine.
Caracter\u00edsticas del producto
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50\/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the alternative for applications requiring a good part turn, optional dual output, or an inability for the electric motor to be back again driven. The DC correct angle gear motors are created for continuous and intermittent duty operation. Our right angle gear reducers were created with many mounting plate options, making them ideal for a variety of DC electric motor based applications. You can expect 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1\/43 to 3\/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a little package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking characteristic since the result shaft can\u2019t rotate when there\u2019s no power used. On top of that, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking \/ Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks \/ Industrial Conveying Devices \/ Security Gates \/ Dental care Seats \/ Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Items will work with you to create and manufacture a Worm Gear Electric motor which will optimize the efficiency of your unique application.
Built to your unique requirements
Electric motor Type: Brushed \/ Brushless \/ Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Material de engranajes
Shaft Configuration: (D Chop \/ Round \/ Splined \/ Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical \/ Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor<\/a> uses a metal gear box for durability and a high torque output. Because of the special mechanical framework of the worm drive the motor output shaft is definitely self locking and will not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and can achieve 40RPM, with a torque of 8kg\/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg\/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear products from EP DRIVESYSTEMS especially show their strength in applications where superior gear ratios are essential. Our worm geared motors happen to be therefore optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each of these has its unique requirements. The EP series worm gear motors can be quickly and effectively adapted to meet your needs.
Worm gear models impress with their high power density and compact style. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
As well as the basic EP casing, you can expect an extensive type of bolt-on elements to customize the product including torque arms, shaft covers and output flanges. These could be easily field set up, but we will also be glad to assemble the average person components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear products feature a simple, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes the product preferably suited for severe and challenging industries like food processing and pharmaceuticals.
Adaptable input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have on all sides diverse fixing possibilities and enable an easy assembling for the customer.
Various other drive configurationscan be designed by use of built-about components (e.g. torque arm and result flanges). The housings are made in light weight construction out of aluminium die cast. Motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly\/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load rate, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most suitable for applications where a simple to match, high torque result is necessary, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most suitable for applications where an easy to fit, high torque end result is required
Ideal for student based tasks including robots and buggies
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Excessive torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that’s, in the case of motor without electric, the outcome axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole electric motor output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r\/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a better option compared to the spur gear motor. Why is worm gear so particular? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, due to the increased friction involved between the worm and worm-wheel, when usually a single start (a single spiral) worm is used. This is normally a advantage when it’s desired to remove any probability of the result driving the input.”
In other words, it is difficult to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g<\/p>","protected":false},"excerpt":{"rendered":"

Worm travel gearbox with motorworm motorA robust worm-drive gearbox powered by an MM28 motor. Ideal applications where an easy to fit, high torque result is required. Great for student based assignments including robots and buggies.The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. cutting […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"status","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-1190","post","type-post","status-publish","format-status","hentry","category-ptogearbox","post_format-post-format-status"],"_links":{"self":[{"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/posts\/1190","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/comments?post=1190"}],"version-history":[{"count":1,"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/posts\/1190\/revisions"}],"predecessor-version":[{"id":1191,"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/posts\/1190\/revisions\/1191"}],"wp:attachment":[{"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/media?parent=1190"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/categories?post=1190"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ptogearbox.xyz\/es\/wp-json\/wp\/v2\/tags?post=1190"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}